DK Digital CDB-700 Instrukcja Użytkownika Pobierz pdf (Strona 13)

Page 13 of 108

IP Protection degree

The products can be cleaned as follows according to their IP protection, which is stated on the product label.

The IP code speciﬁes the degrees of protection provided by the enclosures. For most products only the protection against ingress of water (second

characteristic numeral) is speciﬁed, ingress of solid foreign objects or dust (ﬁrst characteristic numeral) is not speciﬁed and therefore replaced by the

letter X in the code. For some special industrial products both the ﬁrst and second characteristic numerals are speciﬁed. This is a demand from the

marked and will only be speciﬁed if tested and approved.

IP protection Cleaning instructions

IPX0 Clean with a damp cloth

IPX1 Clean with a damp cloth

IPX2 Clean with a damp cloth

IPX3 Clean with a damp cloth

IPX4 Clean with a damp cloth

IPX5 Wash with a brush and water, but not water under pressure

IPX6 Wash with a brush and water. The water can be under pressure, but the system must not be

hosed down directly with a highpressure cleaner. Max. 20

IPX6 Washable according to IEC 60601-2-52 Clean by the use of wash tunnels according to IEC 60601-2-52

To avoid degreasing of the piston rod, the actuator should be retracted to minimum stroke and without load before washing.

Warning!

The systems must not be sprayed directly with a highpressure cleaner.

Warning!

Interconnecting cables must remain plugged in during cleaning to prevent the ingress of water.

Warning!

Cleaning with a steam cleaner is not permitted.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 107 108

Komentarze do niniejszej Instrukcji

Brak uwag

DK Digital CDB-700 Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie DK Digital CDB-700