DK Digital CDB-700 Instrukcja Użytkownika Pobierz pdf (Strona 78)

Page 78 of 108

The HL70 is a handset with integrated locking function, where a selective

locking of the different functions is available by use of a special key. The

HL70 is an alternative to the HB70 combined with an attendant Control

Panel (ACM, ACL, etc.).

20. HL70 (MEDLINE

CARELINE

)

19. HD8X (MEDLINE

CARELINE

) for JUMBO Care system

Has an optimised ergonomic design shaped for the hand. The handset is suitable for

all kinds of MEDLINE and CARELINE applications with OpenBus control system such as

hospital beds, patient lifts, treatment and examination couches etc.

Usage:

• Usage temperature: 5º C to 40º C

• Storage temperature: -10º C to +50º C

• Compatibility: CBJ-C

• Approvals: IEC60601-1:2005 3

edition, ANSI/AAMI ES60601-1:2005

edition and CAN/CSA-22.2 No 60601-1:2008.

Recommendation:

• Unless otherwise specified or agreed by LINAK - the handset is only intended to be used on LINAK systems.

• When changing handsets for OpenBus™ systems the power must be switched off.

• It is recommended to check the handset and cable for damage and holes made by violent handling before washing the application or at least once

a year.

• It is recommended to have a parking place for the handset on the application, where the customer ensures that the handset does not fall off.

• Clean the handset regularly to ensure good hygiene standards.

• When a defective HD8X is replaced, check that the new HD8X has exactly the same speciﬁcation and functionality.

• Do not submerge the handset under water.

For handsets with magnet:

• If handsets with magnet are attached to a smooth surface, a movement or twisting of the cable, for example during transport, can cause the

handset to move and result in damage if the cable is squeezed.

• The force of the magnet depends on the thickness of the lacquering, the lacquering type, stickers, steel thickness etc.

It is the responsibility of the customer to verify that the holding force on the application is acceptable.

• It is the responsibility of the user/operator to evaluate any possible risk caused by use of permanent magnets.

Warnings!

• Do not sit or lie on the handset. It can cause unintended movement of the application.

Warnings!

• When using the locking function on HL80 check that the handset switches are actually locked.

• Locking function on HL80 only locks the actual handset.

• Do not sit or lie on the handset. It can cause unintended movement of the application.

• Locking of a single channel at HL8x do not neccesarily prevent that channel from activation, if the same channel are covered by another handset

button (e.g. at simultaneous drive) or another control unit.

21. HL80 (MEDLINE

CARELINE

)

The HL80 handset has an optimised ergonomic design and switch activations.

The HL80 is a lockable handset, which makes it possible to lock or unlock one or several functions.

It is available in several different standard versions with a variation of bed symbols for easy interaction with end-users.

Usage:

• Approved according to: IEC60601-1:2005 3

edition, ANSI / AAMI ES60601-1:2005, 3

edition, and

CAN / CSA-22.2 No 60601-1:2008

...to be continued

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 107 108

Komentarze do niniejszej Instrukcji

Brak uwag

DK Digital CDB-700 Instrukcja Użytkownika Strona 78

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie DK Digital CDB-700