DK Digital CDB-700 Instrukcja Użytkownika Pobierz pdf (Strona 16)

Page 16 of 108

Compliance to all relevant EC

directives

China

Pollution control mark (also

indicates recyclability)

ZERO standby power

Regulatory Compliance Mark:

The Australian Safety/EMC

Regulations

Protection against contact/

foreign matter (first character)

and water (second character)

as per EN60529

Alternating Current

Direct current

Lock function

Release function

Charge indicator

Safety switch/enable button

C/N XXXXXXX

ETL Recognized Component

mark for Canada and United

States

For complete description, see

ETL-marking on next page.

Insulation class

LINAK control boxes are available in insulation class 1 and insulation class 2.

Class 1 means with earth connection

Class 2 means without earth connection

When measuring the resistance in the earth connection in LINAK Control Boxes (class 1), it is recommended to use equipment, delivering a test

current of no less than 5A. The resulting voltage will correspond to the resistance in the earth connection. Test currents below 5A, would yield no

exact measurements.

Key to symbols

The following symbols are used on the label on the LINAK products.

If the application is insulation dielectric strength tested by applying a test voltage from the terminals of the mains connection to any

accessible metal parts (e.g. 4 kV for 240 V rated medical equipment), corona discharge or a momentary flashover might occur within

the actuator. This is not considered as an insulation breakdown.

However to avoid to overstress different types and levels of insulation, the control box and the actuator must be tested individually

(disconnected) with the respective dielectric strength test voltages (e.g. 4 kV for a 240 V rated control box and 500 V for the actuator).

This principle is in accordance with IEC 60601-1:2005, cl. 8.8.3.

UL Listing Mark

UL Listing Mark for Canada

and the United States

UL Listing Mark

UL962

UL60601-1

UL1310

AS 3108

Australian approval mark

Various

TÜV Rheinland - LGA tested

Recognised

Component Mark

Canadian

Recognised - Component

Mark

Recognised

Component Mark for Canada

and the United States

PSE-Mark

IEC 60417-5172:

Class II equipment

Product with a thermofuse

IEC 60417-5957:

For indoor use only

IEC 60417-5222:

Safety isolating transformer,

general

IEC 60417-5840:

Patient part of type B

Patient part of type BF

Earth

IEC 60417-5019:

Protective earth; protective

ground

IEC 60417-5002:

Positioning of cell

ISO 7000-0434A:

Caution, consult

accompanying document

ISO 7000-1641

Operating instructions

Electronics scrap

Recycle

IPXX

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 107 108

Komentarze do niniejszej Instrukcji

Brak uwag

DK Digital CDB-700 Instrukcja Użytkownika Strona 16

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie DK Digital CDB-700